Your position: Home > Products
About
hot articles

Hot line

15052170029

Forging Drill Rod

Forging Drill Rod

Forged drill rods are divided into long and short tips, which can be used in different applications and scenarios. Forged long tips are suitable for use in marble, quartzite, granite and other types of rocks.

CONTACT

Forged drill rods are divided into long and short tips, which can be used in different applications and scenarios. Forged long tips are suitable for use in marble, quartzite, granite and other types of rocks. Their characteristics are high hardness and brittleness, easy to break when the drill rod hits, and the drill rod with good blanking effect is forged long tips. It is not easy to break. Customized specifications: hydraulic hammer drill rods with diameter of 175mm, 180mm, 185mm, 190mm and larger than 195mm can be produced on time for delivery: small batch orders usually have a delivery cycle of one week, and large batch orders have a delivery cycle of about 30 days;


Classification and Introduction of Forged Drill Rod

Forged drill rods are divided into long and short tips, which can be used in different applications and scenarios respectively.

Forged long-pointed drill rod is suitable for use in marble, quartzite, granite and other types of rocks. Its characteristics are high hardness and brittleness, easy to break when the drill rod hits. The drill rod with good blanking effect is forged long-pointed drill rod, which is generally not easy to break.


Forging short-pointed drill rod is suitable for use in limestone, bluestone and other types of rocks. Its characteristics are low hardness and high cotton property. When drill rod strikes rocks, it is not easy to break off. Sometimes a hole will appear, and the dust is large. It will often be stuck in the hole of rocks. If the stick is shallow, the drill rod will break the point. If the stick is deep, the stick will be broken. The fracture of the outer roots of the sleeve will be reduced by more than 90% if the short-tipped drill rod is used to pry it. The suitable drill rod for cotton rocks is the short-tipped square grooved drill rod. This type of drill rod can also be used in rocks with high hardness and brittleness. 


prev:Conical Grooved Drill Rod Next:none
Products
Article
Purchase:* Must
  •  




Copyright@ 2019 JIANGYIN JIANGNAN HEAT TREATMENT CO.,LTD. 备案号:苏ICP备19028451号

Technical support:无锡网站建设